There is no heel cup, and the SP binding uses a rear entry system called [Fastec] that raises the high back and pushes the entire foot toward the tip of the toe.
The biggest advantage of the Fastech system that comes to mind is that it can be installed quickly.Not only that, "a big advantage"Did you know that there is?
Yunosuke Sugaya, who has been attracting a lot of attention for his aggressive style that combines carving and grand tricks, is one of the riders who have great confidence in its performance.He thoroughly explains the special structure of SP binding with ultra-high response.
In the case of normal two-strap binding, apply pressure locally and vertically with the straps on the tip side of the knob and the strap on the ankle side.
On the other hand, the SP binding that adopts [Fastec] applies a front-back force that pushes the entire boot to the toe side by raising the high back by predetermining the strap position on the toe side and the ankle side. And attach it.In addition, the ankle lever can be used to apply vertical force to the ankle.As a result, it can be installed by applying force to both front and back, up and down.You can get a hold feeling that wraps the whole foot'S.
In addition, Sugaya says that the lack of a heel cup also creates a big positive factor for slipping.
In the case of two straps, the force applied to the high back is transmitted to the base plate through the heel cup when the heel side turns or the heel moves to ride on the heel side.During this time, there is a power loss due to the binding and a loss of time until the force is transmitted to the base plate.
However, in the case of SP binding, there is no heel cup, and the wire installed on the high back is connected to a little before the center of the base plate, so the force received by the high back can be directly transmitted to the base plate.in short,The binding does not bend and does not lose power.Get high responseHm.
Good response = You can convey the power you have transmitted to the board without waste
If the board moves obediently to your own movement, you can use the board more accurately.
Control the board severely by reducing as much as possible the uncertainties that affect your slip, such as "the binding bends and absorbs the force".This is advantageous not only for people who want to carve firmly and want to slide at high speed, but also for beginners in terms of being able to move the board obediently.It should lead to improvement.
[Profile]
Yunosuke Sugaya / Born October 1994, 10 in Tokyo.
■ Stance / Goofy
■ Angle / + 27 ° + 18 °
■ Home Mountain / Palcall Tsumagoi, Mt./Iwappara Ski Resort, Kandatsu Kogen Ski Resort
■ Team / Iwahara Snowboard School, PROJECT K9 Media / Let's try4, SPREAD, now or never (SPREADsnowboards), PROJECT K9
