OJK PLATE
▲0.8 (FREE STYLE WOMAN & Jr)
> HARD
COLOR: SKYBLUE, ROSEPINK
PRICE: ¥ 15,180
> MIDDLE
COLOR: PINK, GREEN, YELLOW
PRICE: ¥ 14,630
▲01 (FREE STYLE)
> HARD
COLOR: RED, BLACK, BLUE
PRICE: ¥ 16,060
> MIDDLE
COLOR: PINK, GREEN, YELLOW
PRICE: ¥ 15,070
▲02 (ALPINESTYLE)
> HARD
COLOUR: BLACK
PRICE: ¥ 17,380
> MIDDLE
COLOR: GREEN
PRICE: ¥ 16,280
▲OJK CARVING PLATE
02PLUS (ALPINESTYLE)
Corresponding stance width: 42cm-52cm
PRICE: ¥ 29,920
02α (ALPINESTYLE)
Corresponding stance width: No limit
PRICE: ¥ 29,920
▲DRAG DAKE
COLOR: PINK, BLACK, GREEN, YELLOW
PRICE: ¥ 8,910
The OJK plate is an innovative plate that was devised by a carving specialist, a professional demonstrator, and developed in every detail.By changing the camber attached to the plate itself and the material used by the simple but high-precision resin manufacturing technology, two types of properties, HARD / MIDDLE, are created separately. HARD uses ABS GR2 with less camber, and MIDDLE is made of polyethylene with more camber.This difference changes the effectiveness of the control performance of the plate.At the same time, by using the attached joint bolt developed according to the plate, you can easily install the plate and binding according to your favorite stance position, and it is also excellent in usability.
By using the OJK plate, it supports the ability to capture the snow surface at the nose during turns and flats.Grip power is greatly improved by catching the snow surface with a flat surface.In addition, the unequal thickness of the plate ensures that the snow surface is caught by carving and stabilizes the turn.At the same time, it absorbs the vibration during gliding, and by raising it about 1 cm above the snow surface, the drag of the boots disappears and at the same time the weight is increased, and the board can be stepped on efficiently even with the same load.In addition, it has an outstanding sense of stability even in rough burns and spring shaba snow.And because the plate is lightweight, it does not burden the rider even when used, and there is less fatigue.
In addition to the two basic types of HARD / MIDDLE for freestyle, the OJK plate is 2 for narrow boards used by women and juniors, and 0.8 for alpine boards, which is more flexible than the conventional type.
Released two types of HARD / MIDDLE with enhanced kusu.In addition, two models, 2PLUS and 02α, which are 02 plus an aluminum frame, will be added this season. 02PLUS has improved stability due to the effect of the aluminum frame in addition to the conventional plate effect. The 2α has a built-in aluminum frame to obtain a reliable edge grip.
Riders who are active as demonstrators also appreciate the effect of this plate.
"The grip when the board is erected by carving is very good, and there is a sense of security even in a hard burn. In addition, the vibration transmitted from the snow surface is absorbed firmly, so you can feel a sense of stability even when carving on rough terrain. Risk of falling. (Misa Honda: using 01 MIDDLE) "
"I love the Intec type binding, which is said to move in the left-right direction, but it goes well with the OJK plate and assists in the softness of the suspension. A delicate touch is required. It is especially useful in the technical events that are held (Yasutomo Yoshida: 02HARD is used) "
Further attention is paid to the new work "DRAG DAKE".It is a plate to eliminate the drag when making a deep carving turn.Circular ribs and vertical ribs are set inside the 11 mm thick high-density polyethylene resin plate that improves operability and performance without compromising the performance of the board, and this structure enhances the power balance.It also brings out the grip effect on carving turns.Each plate weighs only 1g and can be easily mounted using OJK's special brass joint bolts. By getting a height of 168mm, the drag during the turn is eased, and the effect is great, such as comfortable carving, strengthening of the edge grip and the floating feeling of the powder run.
I would like you to try this plate once.Improve your riding skills, boost the fun of snowboarding, and slip through this season.
Hard flex specification using ABS GR2000 with less camber (above).Mid-flex specification using polyethylene material with more camber and higher vibration absorption (bottom)
Screw this joint bolt into the insert of the binding to fix it, and attach the binding as usual from above to complete the equipment
The new DRAG DAKE, installing this 11mm resin plate between the binding and the board reduces drag and improves turn performance.
Click here for information on the latest lineup of OJK PLATE
