There are two ways to adjust the SP Bindings highback.The first is to defeat the highback.This is called putting forward lean.By tilting the highback to the toe side, it is possible to increase the reaction to the heel side.also,In the case of SP Bindings, the effect of further enhancing the matching with boots.
The anterior scalene angle (the angle of the ankle of the boot) is set in advance for the boot.Generally, a lot of forward tilt angles are set for models that are supposed to be high speed riding.In many cases, the forward tilt angle is not set so much for beginner models and models for jibing.
When setting the boots, it is recommended to insert a forward lean so that there is no gap between the high back and the boots.If there is a gap, power transmission will be insufficient and there will be a time lag in the reaction, so performance will not be exhibited.Adjust the forward lean according to the angle of the boots.
<Generally many categories, forward lean adjustment>
△ Beginner
Forward lean adjustment is basically unnecessary.
△ Those who want to learn sharp carving for intermediate level and above
By inserting a forward lean, it supports the board to stand up strongly.In the technical category, there are many people who defeat it enough.This is because it is necessary to erect a board in the high speed range.For those who slide at high speeds in any category and keep their basic posture low, we recommend using forward lean.If your basic posture is low, your ankles are bent a lot, so it is important to set the forward lean according to that posture.
△ Ground trick, jibing
Basically, few people put forward lean.It does not slip at high speeds, and the range of motion is important, so it maintains a moderate response.
△ Powder and terrain riding
There are many people who like the left and right and make forward lean adjustments.Adjust according to each model so as not to impair the moderate reaction and range of motion.
△ Half pipe, big air
Many people put forward lean on both feet.This is because the board needs to be raised strongly and a high reaction is required.Eliminates power loss and obtains high response.
If you haven't defeated it as it is, give it a try.Maybe your weak heel side turn will change?
The SP Bindings can be adjusted by turning the dial on the high back lever.The higher the silver memory goes, the more the highback will fall.
<What is high back rotation? ＞
What is highback rotation? Where to set the highback on the calf side?It will be that.Imagine your slipping posture.If you are a general snowboarder, I think that few people make adjustments.However, when you become an advanced player and learn the knowledge of gear and the theory of slipping, you will reach this high back rotation.
<Generally many stances, rotation adjustment>
△ When both feet are facing forward (for example, stance is 24, +6)
Adjust the high back rotation toward the nose.Move the highback in that direction as the foot performs to the nose side.
△ In the case of a chest of drawers
Move the highback to the outside of the foot in proportion to the angle of the foot
△ When both knees slip inside
Move the highback to the inside of the foot
By making the above adjustments, it is possible to further enhance the reaction.I want you to adjust it according to your taste of slipping
The adjustment method is possible by loosening the screw on the outside of the foot at the base of the highback and adjusting the position on the inside.
You're a pretty snowboard master adjusting to high back rotation.If you haven't tried it yet, please give it a try.You will surely find your best setting.
If you have any questions or concerns regarding this article, please contact us at:
faq@uspj.co.jp
