SP Bindings uses a system called FASTECH for all models. No other binding has the same hold and response as SP Bindings.Today I would like to explain the secret.
<Hold that is sandwiched between a toe cup and a high back>
In a typical two-strap binding, the toe strap is held down from above.There is no hold from highback. In the case of SP Bindings, set the toe cup in a predetermined position, put the boots there, raise the high back and lock it.Hold it firmly from the toe direction and heel direction by firmly sandwiching it between the high back and the toe cup.The highback acts like a third strap.What kind of effect does it have when riding?
When power is transmitted in the direction of the heel, the highback is transmitted and transmitted, but the board can be erected by raising the toes.The high back and toe cup enable efficient and smooth power transfer in the direction of the heel.At the same time, it has the same effect as having the consciousness of raising the heel when riding on the toe edge.
<Strength of hold>
For a typical two-strap binding, use a buckle (a type that tightens the grab) to hold it. SP Bindings allow for hold strength not possible with standard buckles.In the case of buckle type, there is a limit to the holding strength.However, SP Bindings can hold stronger than regular buckles.The toe cup causes a high back and suppresses it, allowing a strong hold.The ankle strap is a type that snaps the auto RS buckle, so you can hold it strongly.Since you can take a wide range of hold strength, you can adjust it according to the condition and riding style.
A strong hold will help you feel more secure, improve your response and prevent ankle injuries.
<Hold direction>
In the case of a general two straps, the two straps are the hold that holds down from above.
In the case of SP Bindings, it is a hold that sandwiches the toe cup and high back and a hold from the top of the ankle strap.
Experience this hold.Once you taste it, you will never forget it.
