The 18-19 model "SEVEN BOA" has the world's top quality in waterproofness, durability and gliding properties.Frequency technology is used to reduce the seams of the boots to the utmost to prevent water ingress. Asymmetrical cuff cuts and inners are used (because water enters from the seams), which not only fits the foot but also has high holdability and smooth movement of the ankle to prevent the boot from losing its shape.Reliable waterproofness and a calculated structure increase durability, and you will not feel unsatisfactory even in the second half of the season.Carbon is used for the arch of the outsole to improve the response of the toe edge and heel edge.The calculated wire cable loop pattern has high holdability and performance.The know-how of head boots, which has been focusing on the development of BOA boots for many years, is concentrated in SEVEN BOA.Progressive power straps are highly effective in holding the upper part of the boot, performing well, and reducing the risk of injury.Park riders who enjoy jumping and aggressive jibbing from free riding enthusiasts who enjoy speeds above the middle speed range, big air and half pipe competitors, riders aiming for the top in technical championships, turn specialists who act as demonstrators, prefer hard riding It is used by extremers and many snowboarders.
I will explain each function.
<FREQUENCY TECHNOLOGY>
Waterproofness is improved by reducing the number of seams to the utmost.In addition, a cover is installed to prevent water from entering from the instep.It keeps water out of the boots and prevents performance degradation, discomfort and deterioration.
<ASYMETRIC CUFF CUT>
The position of the cuff cut on the outside is set a little higher based on ergonomics, and the position on the inside is set a little lower.
The structure on the Achilles tendon side has less unevenness, improving matching with highbacks and heel cups.The risk of breakage is reduced by not creating pressure points.The flex of the boot itself is set to be stiff, and the boot is finished firmly.
<BOA®️ INSTEP GRASP>
As a feature of the BOA®️ closure system, it is strongly held from the part close to the coiler.The BOA®️ closure system is installed on the outside of the ankle to hold the ankle firmly.
<NINJA PRO>
Carbon is placed on the arch of the foot to increase the edging response on the toe and heel sides.One of the attractions is the good grip when walking on the snow.
<FORWARD LEAN 11 °>
The ankle angle of the boots is set to 11 °.
<PERFECTFIT 2ND SKIN>
You can adjust the foot width of the boots with a belt.It is possible to narrow the foot width by stopping the magic tape while pulling strongly.You can make fine adjustments to the left and right.
<Instep height adjustment pad>
There is a pocket on the instep.It is possible to put the attached pad there.If the height of the instep is low, insert a pad to adjust.It is also possible to put a pad to increase the load and reaction to the heel side.The less play on the instep, the more responsive it is.
The photo is the left foot.Designed asymmetrically to match the shape of the ankle, it covers the position where the buckle of the ankle strap comes, and wraps it so as not to create a pressure point.
The photo shows the left foot (outside)
The photo shows the left foot (inside)
The webbing belt extended from the inner shoelace enhances holdability and performance.The pressure to hold the ankle is calculated and it has such specifications.The strap attached to the upper part of the inner can also be removed.With this strap, it is possible to improve the holdability of the sneaker part and transfer the power directly to the boots.The responsiveness of this inner belt is very popular with users.
<Recommended user>
- Users looking for boots with solid support
- Users seeking waterproofness
- Users seeking durability (people who have a lot of skiing days a year or who work on snow)
- Users looking for high performance boots
- Users who are particular about boots and want to make fine adjustments and customize their feet
- Users who often slip at medium speeds and above and seek response
- Intermediate and above users who jump and slide in the park
- Users who want to fly high with a half pipe
- Users who are thinking of getting a certification or participating in a technical championship
- Users participating in speed competitions
Rider used
Slopestyle competition
Hayata Akakawa, Itsuki Nakamura, Juri Shibasaki, Manabu Mabuchi, Shutaro Amekai, Ayumi Kitahara, Yuri Yoshiya, Rina Yoshiya, Kanami Okuyama, Yoshiki Nemoto
Rider / Manabu Mabuchi
Rider / Manabu Mabuchi
Backcountry competition
Masaomi Harada, Yamato Maehara, Itaru Fujinuma, Saori Okada
Technical competition
Yuji Usui, Atsushi Taniguchi
Rider / Yuji Usui
Rider / Yuji Usui
Rider / Yuji Usui
Border cross competition
Saki Aya Kotake, Runa Suzuki